Bungalow Entryway with DIY Hook Rail

I’ve been working overtime on the house these past several weeks, trying to wrap up as many things as possible before the end of the year. Deadlines are motivating, even when they’re totally arbitrary. As a result, I have a couple of projects to catch you up on. First up: our finally finished entryway.

The last time you saw our entryway – nearly two years ago – I listed three remaining to-dos: installing a new door, replacing the moulding, and making a coat rack. As of last weekend, all of that is now done!

I bought this JELD-WEN Craftsman 6-Lite Primed Steel door from Home Depot and painted it black. In the end, I probably wouldn’t recommend this door for dark paint. The white plastic grid is affixed to the glass, which means you can see the back of it but you can’t paint the back of it – it has to stay white, which contrasts sharply with dark paint. It’s fine – it’s something I notice, but others probably don’t.

White Door Before Paint.JPG

Next, I removed and replaced the moulding around the front door and closet. You’ll have to wait until the end of the post for an After shot.

Moulding in Progress.JPG

Then came my DIY hook rail. I wanted the rail to look different than my door trim, so it was clear that it wasn’t just more of the same moulding. I bought a piece of primed trim with squared edges (the door trim has slightly rounded edges) and, using my table saw, I routed out shallow, decorative notches at the top and bottom of the wood.

Hook Placement on DIY Rail.JPG

I measured out the placement of my 8 hooks and drilled pilot holes – I did this before painting, so I wouldn’t have to worry about marking up or scratching the painted finish. The brass hooks are from House of Antique Hardware; I got them for 15% off on Black Friday. Emily over at The Sweet Beast also used them in her awesome stairway makeover. (Side note: one time I Googled “sweet beast” and ended up here instead of Emily’s blog, and now I just go there on purpose sometimes. Check out this fantastic beast!)

I used painters tape to mark off where the studs are in the wall. I installed the rail by screwing into the studs that aligned with my hooks. That let me cover the screw heads with the hooks. For safe measure, I also used a toggle bolt behind one of the non-stud hooks.

Hook Rail MountingJPG.JPG

With the rail up and the pilot holes ready to go, adding the hooks was quick work.

Mounted Hook Rail.JPG

And here’s the finished product:DIY Brass Hook Rail.jpg

Here you can see the new moulding around the door and closet. I like how continuing the rail around the corner helps balance the off-set door.

Black Craftsman Door.jpg

When we bought the house:Entryway Door Before.JPG

And now!

Entryway with Black Door.jpg

4 thoughts on “Bungalow Entryway with DIY Hook Rail”

  1. MARTI, USUAL FINE JOB. QUESTION? LIVING IN CHICAGO, SNOW, RAIN, ETC., WHAT ARE YOU GOING TO DO WITH MOISTURE ON YOUR HARDWOOD FLOOR UNDER YOU COAT HOOKS?, JUST A THOUGHT. KEEP UP THE GOOD WORK. MUCH LOVE, DAD

    On Sun, Dec 23, 2018 at 11:33 AM Project Palermo wrote:

    > Marti posted: “I’ve been working overtime on the house these past several > weeks, trying to wrap up as many things as possible before the end of the > year. Deadlines are motivating, even when they’re totally arbitrary. As a > result, I have a couple of projects to catch you” >

Leave a Reply to katwachter80 Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s